Trimble FMX

The Trimble® FmX® integrated display is an advanced, full-featured guidance display for all your precision farming applications. It is ideal for farmers who require high accuracy levels and functionality. The FmX® integrated display provides advanced precision agriculture functionalities, including: Guidance and Mapping Coverage, point, line, and area mapping Manual guidance for a number of field…

Continue Reading →

Land Forming

SAVE UP TO 80% in Earthworks With Agricultural Land Forming!  Find out how by clicking HERE. Water Flow The greatest proportion of broad acre irrigation in Australia is flood irrigation. The water is conveyed in open earth channels. It is then applied to the land through some form of outlet in the channel bank. Once on…

Continue Reading →

Laser Leveling A Field

SAVE UP TO 80% in Earthworks When Laser Leveling Fields!  Find out how by clicking HERE. Laser leveling system helps conserve moisture Nov 2, 2000  Ron Smith | Southwest Farm Press Saving every drop of rain that falls is extremely important to West Texas farmers who often make do on less than 20 inches a year. Most, including Taylor…

Continue Reading →

Land Grading For Irrigation

SAVE UP TO 80% in Earthworks When Land Grading for Irrigation!  Find out how by clicking HERE.   Land Grading for Irrigation: Design and Construction Source: C. F. Cromwell and Mark Peterson Department of Agricultural Engineering Phillip D. Coombs Natural Resources Conservation Service Land grading is reshaping the surface of land to planned grades for irrigation and…

Continue Reading →

John Deere iGrade

How Is OptiSurface Compatible with John Deere iGrade? OptiSurface can produce two types of designs for John Deere IGrade: 1) Planar (Straight or Flat) Design Surfaces (2D) and, 2) Curved Design Surfaces (3D) The differences are explained below. PLANAR DESIGNS (2D) John Deere IGrade by itself can ONLY follow single plane designs. OptiSurface can be used…

Continue Reading →

Agricultural Land Leveling

What are the benefits of land leveling for Rice? 1. Higher yield Good field leveling increases the rice yield considerably. In two experiments conducted at different localities, a strong correlation was found between the levelness of the land and crop yield. 2. Better weed control Land leveling increases yield to a large extend because it…

Continue Reading →

OptiSurface Development Commences

The OptiSurface concept was concieved by farmer, David Cox, after seeing the negative effects of tradional laser landforming. He enlisted Agricultural Engineer, Dr Graeme Cox to develop a software system to enable optimum surface landform designs which offer the benefits of tradional laser landforming but with much reduced earthworks and topsoil removal.

Continue Reading →

Page 10 of 10